Visitor Survey

269.372.6000
info@teclab.com
Request Information

Laboratory Options

Laboratory Base Cabinet Options

Corner Adapters

Corner Adapters

Corner Adapters are available in two heights to correspond with the two available heights of standard Base Cabinets. Corner Adapters provide a flush filler panel when placed between Corner Cabinet and adjacent Base Cabinet or Panel Leg. Mounts directly to cabinet side for easy installation and is finished in the same manner as the Base Cabinets.

WCA-1500 (Bench Height (35 1/2" high x variable width)

WCA-1000 (Desk Height (28" high x variable width)

One SheetPRODUCT PDF

Filler Panels

Filler Panels

Filler Panels are available in two heights to correspond with the two available heights of standard Base Cabinets and provide a smooth filler between the cabinet and wall. Each Filler Panel is finished in the same manner as the Base Cabinets.

WFP-1500 (Bench Height (35 1/2" high x variable width)

WFP-1000 (28" high x variable width)

One SheetPRODUCT PDF

Channel Cabinet Spacers

Channel Cabinet Spacers

Channel Cabinet Spacers are available in two heights to correspond with the two available heights of standard Base Cabinets. Placing the Channel Cabinet Spacers between the Base Cabinets provides a flush filler panel. Each Channel Cabinet Spacer is finished in the same manner as the Base Cabinets.

WCCS-15 (Bench Height (35 1/2" high x variable width)

WCCS-10 (Desk Height (28" high x variable width)

One SheetPRODUCT PDF

Modesty Panels

Modesty Panels

Each Modesty Panel is a reinforced assembly equipped with a wiring channel and is finished in the same manner as the Base Cabinets. Modesty Panels extend between Base Cabinets or Panel Legs to provide stability to some workbenches. Modesty Panels also provide some privacy and can be used to hide plumbing, wiring or duct work behind the workbench.

Modesty Panels - Full Height (shown)

WMP-15xx (Bench Height (35 1/2" h x 1"d x variable width)

WMP-10xx (Desk Height (28" h x 1" d x variable width)

Modesty Panels - For use with Apron Drawers

WMPA-15xx (Bench Height (29 3/4" h x 1"d x variable width)

WMPA-10xx (Desk Height (23 1/4" h x 1" d x variable width)

One SheetPRODUCT PDF

Apron Drawers

Apron Drawers

Apron Drawers utilize the standard “A” size Base Cabinet drawer in the six available widths. All Apron Drawers are manufactured to accept locks. Manufactured and finished to the same rigid specifications as the Base Cabinets.

WAPD-18 (Case: 18" wide x 5" high x 22" deep)

WAPD-24 (Case: 24" wide x 5" high x 22" deep)

WAPD-30 (Case: 30" wide x 5" high x 22" deep)

WAPD-36 (Case: 36" wide x 5" high x 22" deep)

WAPD-42 (Case: 42" wide x 5" high x 22" deep)

WAPD-48 (Case: 48" wide x 5" high x 22" deep)

One SheetPRODUCT PDF

Panel & Support Legs

Panel & Support Legs

Panel Legs are available in two heights to correspond with the two available heights of standard Base Cabinets. These Panel Legs are constructed of heavy-gauge, welded steel assembly, with easily removable side panels. Each is provided with knockouts in the back frame and punch outs in the top to allow for flexibility during installation. Each Panel Leg is finished in the same manner as the Base Cabinet.

Support Legs (not shown) are used to hold up work surfaces which require added support and are located away from walls.

Panel Leg WPL-15 (Bench Height (35 1/2" high x 4" wide x 22" deep)

Panel Leg WPL-10 (28" high x 4" wide x 22" deep)

Support Leg WLEG-15 (Bench Height (35 1/2" high x 4" wide x 8" deep)

Support Leg WLEG-10 (28" high x 4" wide x 8" deep)

One SheetPRODUCT PDF

Panel Legs with Electrical Power Kit

Panel Legs with Electrical Power Kit

Panel Legs are available in a variety of power supplies. Standard kit, duplex, or it can be customized to fit any power supply needed.

WPL-15-EP (Bench Height (35 1/2" high x 4" wide x 22" deep)

WPL-10-EP (28" high x 4" wide x 22" deep)

One SheetPRODUCT PDF

Extra Shelf

Extra Shelf for Door Units

Available for any Base Cabinet with a door to provide added storage space. Each Shelf is finished in the same manner as the Base Cabinet.

xx-xxxx-XS (To order, simply add -XS after Base Cabinet model number.)

Apron Fillers

Apron Fillers are use to fill the gap between fixed-sized Apron Drawers and Base Cabinets. Manufactured and finished to the same rigid specifications as the Base Cabinets.

Powered Back Guards

Powered Back Guards (variable length x 4" H x 2" D) are available in lengths to match the length of the work surface or shelf and come standard with Electrical Power Kit EP‑1 (other EP kits are available). PBG‑72‑EP is 72" long providing 6 electrical outlets in EP‑1 kit, PBG‑60‑EP is 60" long providing 5 electrical outlets in EP‑1 kit, and PBG‑96‑EP is 96" long providing 8 electrical outlets in 2 EP‑1 kits.

One SheetPRODUCT PDF

Vertical Power Pole

Vertical Power Poles (variable height x 7" W x 3" D) are used to contain utilities originating from the ceiling such as electric, plumbing or gas.

VPP‑60 (60" Height)

VPP‑96 (96" Height)

Acid Storage Base Cabinets

Acid Storage Cabinets safely store and vent acids and other corrosive liquids.

 

ASC-18-RH (18" wide Acid Storage Cabinet with right-hand hinge.)

ASC-18-LH (18" wide Acid Storage Cabinet with left-hand hinge.)

ASC-24-RH (24" wide Acid Storage Cabinet with right-hand hinge.)

ASC-24-LH (24" wide Acid Storage Cabinet with left-hand hinge.)

ASC-30 (30" wide Acid Storage Cabinet with double doors.)

ASC-36 (36" wide Acid Storage Cabinet with double doors.)

ASC-48 (48" wide Acid Storage Cabinet with double doors.)

One SheetPRODUCT PDF

Solvent Storage Base Cabinets

Solvent Storage Cabinets safely store and vent solvents and other flammable liquids. In case of a building fire, these cabinets protect the contents inside them.

 

FSC-24-RH (24" wide Solvent Storage Cabinet with right-hand hinge.)

FSC-24-LH (24" wide Solvent Storage Cabinet with left-hand hinge.)

FSC-30 (30" wide Solvent Storage Cabinet with double doors.)

FSC-36 (36" wide Solvent Storage Cabinet with double doors.)

FSC-48 (48" wide Solvent Storage Cabinet with double doors.)

One SheetPRODUCT PDF

Countertop Support Brackets

Countertop Support Brackets are used to support work surfaces along a wall or to connect multiple work surfaces. They are built from heavy-gauge steel and supplied with the necessary attaching hardware.

CSB-18 (18" long x 4" deep)

CSB-18-90 (18" long, 2" x 2" L shaped)

CSB-18-90-W (18" long, 2" x 2" L shaped + adjustable levelers)

Casters

Casters

 

Most Teclab Base Cabinets can be used as Mobile Base Cabinets with the addition of Casters. Standard Casters are 4" high (3" wheels).

The height of Laboratory style Mobile bench-height cabinets match the height of fixed cabinets. The height of Laboratory style Mobile desk-height cabinets increases by 3" inches.