Workbenches

Customize your Teclab work stations with these versatile components and accessories.
		Apron Drawers are available in three widths (APD-1500 is 15" W x 3 7/32" H x 27" D, APD-2200 is 22" W x 3 7/32" H x 27" D and APD-3000 is 30" W x 3 7/32" H x 27" D). These items utilize the standard 'A' size Base Cabinet drawer in the three available widths. All Apron Drawers are manufactured to accept locks. Manufactured and finished to the same rigid specifications as the Base Cabinets.
		Small Parts Drawer Cabinet (4" H x 11 1/2" D x 34" W): SP-8106 Small Parts Drawer Unit is equipped with 6 Drawers (2 3/4" H x 5 3/8" W x 11 1/4" D) each with two adjustable partitions per drawer. This utility unit provides needed storage of small parts and can be conveniently positioned on or hanging below TWS Shelf. Finished in the same manner as the Base Cabinets. Small Parts Drawer Cabinet (not shown) (10 3/4" H x 11 1/2" D x 34" W) The SP-8118 is similar to the SP-8106 but is equipped with 18 drawers. Extra Partitions (not shown): XP-8104 Box of 100 each for use with SP-8118 and SP-8106 Small Parts Drawer Cabinets.
		Electrical Power Kit (EP-1) shown on all components with 'EP' suffix): EP- 1 Kit includes 4, 5, or 6 15 amp, 110 volt grounded outlets and illuminated combination circuit breaker rocker switch, 9ft. power cord, plus all necessary components for assembly. The EP-1 Kit is supplied as standard with Powered Shelf Supports, Powered Back Guards, PL-10 and PL-15 Panel Legs, AP3-EP Aprons, and is available as an integral part of several Base Cabinets.
		Electrical Power Kit (EP-2) includes 4, 6, or 8 15 amp, 110 volt grounded duplex outlets and illuminated combination circuit breaker rocker switch, 9ft. power cord, plus all necessary components for assembly.
		Electrical Power Kit (EP-3) includes 4, 6, or 8 20 amp, 110 volt grounded duplex outlets and illuminated combination circuit breaker rocker switch, 9ft. power cord, plus all necessary components for assembly.
		Stainless Steel Sink (SS-3000) for 30" wide Sink Cabinets. Sink made from 302 (18-8) nickel bearing stainless steel. Interior corners are rounded to a minimum of 1 3/4" radii, both vertical and horizontal. Self rimmed, with bowl and faucet deck recessed below outside edge of sink. All exposed surfaces are hand blended to a lustrous highlighted satin finish. Underside of sink is fully undercoated. Dimensions of the bowl are 21" L x 15 3/4" W x 8" D. Stainless Steel Sink (SS-1500) to fit 1500 Series Cabinets. 18" x 14" x 7 1/2".
		Mixing faucet (FM8-412) with swing gooseneck and serrated hose connector.
		Drawer Locks; LK-R (right side) or LK-L (left side) Factory or field installed. One lock kit locks all drawers in a specific cabinet.