|
|
|
Teclab ESD work surfaces are manufactured using ESD laminates.
A 180º roll on the front edge ensures continuous conductivity along the front edge of the work surface.
These countertops provide a colorful, durable, and reliable work surface with the recommended surface resistivity of 1x 106 to 1 x 109 .
|
|
|
|
|
|
The ESD Wrist Strap features a conductive thread interwoven on the breathable elastic band that provides 360º of skin contact.
Comes complete with a 6 ft. coiled foil conductor cord with built-in 1M resistor.
|
|
|
|
|
|
|
A pair of ESD Ground Jacks can be located in Aprons, Apron Fillers (shown here), Shelf Supports or to your specifications.
|
|
|
|
|
|
|
The ESD Multi-Point Common Point Ground System brings all ESD components to the same potential to ground.
All components are linked to a common grounding point, generally located at the rear of the workbench.
This grounding point can range from a single grounding bolt to a multi-connection terminal block.
|
|
|
|
|
|
|
An integral component of a Teclab ESD work station is the Grounded Cabinet. Each drawer has a coiled Ground Wire connected to a Ground Bracket installed on the cabinet shell to dissipate static. The cabinet is then connected to the Common Point Ground System.
|
|
|
|
|
|
|
This ESD Drawer Mat provides a surface resistivity of 109/sq.
The mat fits snugly inside every Teclab drawer and is 1/8" thick.
This mat is available in Blue, Brown, and Beige.
|
|
|
|
|
|
|
This pliable 3' x 4' mat provides the static protection necessary where a dissipative floor is required, but not available. Resistance to Ground is 3.8 x 109 - 1.3 x 1010 per ANSI EOS/ESD-S4.1 @ 10 volts. The Hard Floor Mat offers a dissipative surface over hard floors. This mat is available in Blue, Brown, and Beige.
|
|
|
|
|
|
|
Components equipped with electrical power, like Shelf Supports and Powered Back Guards, are isolated from the dissipative element of the work surface, and the entire workbench ESD Control System by way of a non-conductive barrier, assuring the integrity of the Teclab Common Point Ground System.
|
|
|
|
|
|
|
This bench high ESD chair comes with a synchronized Fluid-Motion mechanism, which allows the seat and back to move in unison, providing continuous lumbar support to the user. Backrest movement "free floats" or can be locked at any point in the range. A sensitive tension control allows easy adjustment of the backrest pressure. Integral lumbar support adjusts to ensure correct seated posture. Comes standard with a 20" height adjustable footring, composite 5-star base and rugged 2" dual-wheel ESD casters. Dimensions: Seat-19"W x 17"D x 21"-28"H. Back-15"W x 13"H. Overall-20"W x 26"D x 42"H. Chair is upholstered in high quality vinyl available in Blue, and Black.
|
Teclab Video