800.832.5227 toll free in the U.S. and Canada • 269.372.6000

6450 Valley Industrial Drive, Kalamazoo, Michigan 49009

Laboratory Fume Hoods With Built-in Blower

All models feature:

Built-in belt-driven, corrosion-resistant exhaust blower with adjustable sheave, molded thermoplastic housing and non-sparking, coated aluminum impeller.
By-pass airflow design.
**Ergonomic air foil with aerodynamic Clean-Sweep*airflow openings.
Glacier white, dry powder epoxy-coated steel exterior.
One-piece molded fiberglass liner and pre-set baffle(s) with flame spread less than 25 per ASTM E-84.
**3/16" thick tempered safety glass vertical-rising sash with epoxy-coated sash handle. Sash does not extend above the hood when fully open.
**Removable front and side panels and front access panels for access to plumbing and electrical wiring.
10.81" ID exhaust connection (4' models); 12.81" ID exhaust connection (5' and 6' models).

Fixtured models feature:

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided.
One pre-wired 115 volt, 20 amp electrical duplex receptacle on lower right side (115 volt models).

All models conform to the following regulations and standards:

SEFA 1-2005
NFPA45-2004
ASTM E84-01
ASHRAE110-95
ANSI Z9.5-2003
UL 3101-1/61010-1
CAN/CSA C22.2 No. 1010.1
UL 1805
CE Conformity Marking (230 volt models)^†

All models require (not included):

Ductwork.
Work Surface.
Base Cabinet or Stand.

Standard models feature:

Pre-wired T8 fluorescent lighting, light and blower switches.

Optional accessories for on-site installation include:

Service Fixture Kits
Electrical Duplex Kits
Guardian Jr. and Digital Airflow Monitor Kits.
Ceiling Enclosure and Rear Finish Panel Kits.
Distillation Grid Kits.
Auxiliary-Air Kits.
Sash Stop Kits.

Explosion-proof models feature:

Explosion-proof blower and incandescent light fixture (bulb not included).
Furnished without switches, electrical receptacle and wiring as these must conform to varying local codes.

Built-In Blower Maximum External Static Pressure @100 fpm

Hood Width

CFM

S.P.

Nominal Ductwork Diameter

Equivalent Resistance^††

4 Feet
5 Feet
6 Feet

730
960
1180

.17"
.12"
.17"

10"
12"
10"

75
75
70

* U.S. Patent No. 6,461,233
** Exclusive Feature
^† pending
^†† Equivalent resistance in feet of straight duct

Heights of switches, electrical receptacle and service fixtures meet requirements of ADA.

Ordering Information

Laboratory Hoods with built-in blower

Nominal Width

Catalog Number

Built-in Blower

Electrical Requirements

Exhaust Collar (ID)

EP Incandescent Light Fixture*

Flourescent Lamps

Service Fixtures

Electrical Duplex

Shipping Weight lbs./kg

4 Feet

4880000

4880200

4880300

4871300**

4871400**

1/3 HP, Std.

1/3 HP, EP

1/3 HP, Std.

1/2 HP, Std.

115 volts, 60 Hz

230 volts, 50 Hz

10.81"

—

1 ea.

—

2 ea. 25 watt

—

2 ea. 25 watt

None

365/166

375/170

370/168

380/172

5 Feet

6080000

6080200

6080300

6071300**

6071400**

1/2 HP, Std.

1/2 HP, EP

1/2 HP, Std.

115 volts, 60 Hz

230 volts, 50 Hz

12.81"

—

1 ea.

—

2 ea. 32 watt

—

2 ea. 32 watt

None

450/204

460/209

455/206

455/211

6 Feet

7280000

7280200

7280300

7271300**

7271400**

1/2 HP, Std.

1/2 HP, EP

1/2 HP, Std.

115 volts, 60 Hz

230 volts, 50 Hz

12.81"

—

1 ea.

—

2 ea. 32 watt

—

2 ea. 32 watt

None

525/238

535/243

530/240

540/245

* Bulb not included ** International electrical configuration EP=explosion-proof

Dimensional Data

4',5' and 6' Laboratory Hoods with built-in blower

4', 5' and 6' Hoods
	A	B	C
4' Hood 5' Hood 6' Hood	48" 60" 72"	38.25" 50.25" 62.25"	10.81" ID 12.81" ID 12.81" ID

Teclab Video Request Information Free Planning & Design Register for Email Updates About Teclab