Models with built-in blower are available. Quiet built-in blower is belt-driven with molded thermoplastic housing and coated aluminum impeller that is non-sparking and corrosion-resistant. Available with explosion-proof or standard motor.
Fluorescent lighting illuminates the interior. The high efficiency, instant start, T8 fluorescent lights are located outside the hood interior for corrosion-resistance and easy replacement. Explosion-proof models are supplied with an incandescent light fixture.
Color-coded service fixtures for gas, air, water, vacuum and other services have remote controls for use regardless of the sash position. Two service fixtures are pre-plumbed on fixtured models. Each hood is factory prepared for up to eight service fixtures (four on each side).
ETL-listed. Hoods carry the ETL mark signifying that they are certified to UL 3101-1/61010-1, UL 1805 and CAN/CSA C22.2 No.1010.1.
Performance tested to ASHRAE 110-1995. |
Front and side panels may be easily removed for lamp replacement and access to electrical supply connections.
Service access panels allow accessibility to plumbing from the front of the hood. |
**Corrosion-resistant, molded fiberglass exhaust connection(s) on models for use with remote blowers.
By-pass airflow design ensures stable face velocities that meet or exceed established standards. |
Pre-set baffle provides a uniform face velocity pattern across the sash opening of the hood.
Large 28" sash opening offers superior viewing. When fully open, the sash does not extend above the hood.
Vertical-rising tempered safety glass sash is anti-racking for smooth operation. Contact Teclab for ordering information on horizontalsliding or combination sashes.
One-piece molded fiberglass liner gives superior corrosion and chemical resistance, durability and light reflectivity. Its smooth, radiused corners make cleaning easy.
Pre-wired electrical components. Fluorescent lights and switches are factory-wired to the hood’s single point junction box. One electrical duplex receptacle is factory-wired on 115 volt, 60 Hz fixtured models. Each hood is factory-prepared for up to four electrical duplexes and an air-flow monitor. Explosion-proof models are furnished without switches, electrical receptacle and wiring as these must conform to varying local codes. |
| **Ergonomic air foil allows air to sweep the work surface for maximum containment. Clean-Sweep* airflow openings pull inflow air from under the air foil so that clean air continually flows over the air foil creating a constant barrier of protection from contaminants. |
Durable and attractive exterior is glacier white, dry powder epoxy-coated steel.
CE mark†. All 230 volt, 50 Hz models conform to the CE (European Community) requirements for electrical safety and electromagnetic compatibility. |
